Tools Locksmiths Use – Matrix Locksmith https://matrixlocksmith.ca Best GTA Locksmith Sun, 28 Dec 2025 11:12:32 +0000 en-CA hourly 1 https://matrixlocksmith.ca/wp-content/uploads/2020/08/cropped-Transparent_png-150x150.png Tools Locksmiths Use – Matrix Locksmith https://matrixlocksmith.ca 32 32 What Kind of Tools Do Locksmiths Use? https://matrixlocksmith.ca/what-kind-of-tools-do-locksmiths-use/ Wed, 26 Apr 2023 09:31:45 +0000 https://matrixlocksmith.ca/?p=20140

Locksmiths require a wide range of tools to carry out their work efficiently and effectively. From essential tools such as key-cutting machines and pinning kits to advanced tools such as lock scopes and electronic lock pick guns, there are many different types of tools that locksmith use on a daily basis. In this post, we’ll take a closer look at the different types of tools used by locksmiths and how they are used.

Essential Tools for Locksmiths

The following are some of the most essential tools used by locksmiths:

  • Key Cutting Machines

Key-cutting machines are used to create duplicate keys. They work by cutting a new key based on the existing key’s profile. Locksmiths use these machines to make new keys for their clients or to replace lost or stolen keys. There are many different types of key-cutting machines, including manual machines and electronic machines.

  • Pinning Kits

Pinning kits are used to rekey locks. They contain a variety of different-sized pins and springs that can be used to match the lock to a new key. Locksmiths use pinning kits when a client wants to change the key that opens a lock without replacing the entire lock.

  • Pick Sets

Pick sets are used to open locks without using a key. They contain a variety of different picks and tension wrenches that can be used to manipulate the lock’s pins and open the lock. Locksmiths use to pick sets when a client is locked out of their home, car, or business.

  • Tension Wrenches

Tension wrenches are used in conjunction with pick sets to manipulate a lock’s pins. They are used to apply tension to the lock’s plug, which allows the pins to be set in the correct position.

  • Plug Followers

Plug followers are used to remove a lock’s plug after the pins have been removed. They are used to ensure that the pins and springs do not fall out of the lock when it is disassembled.

Tools used by locksmith

Advanced Tools for Locksmiths

The following are some of the most advanced tools used by locksmiths:

  • Lock Scopes

Lock scopes are used to inspect the inside of a lock. They allow locksmiths to see the lock’s pins and springs and determine the lock’s complexity.

  • Decoders

Decoders are used to decode a lock’s internal components. They are used to determine the correct key code for a lock, which can then be used to create a new key.

  • Drill Rigs

Drill rigs are used to drill into a lock when it cannot be picked or decoded. They allow locksmiths to drill into the lock’s plug and remove it, which allows the lock to be opened.

  • Electronic Lock Pick Guns

Electronic lock pick guns are used to pick locks quickly and efficiently. They use an electric motor to vibrate the lock’s pins, which allows them to be set more quickly than with manual picks.

Key Decoders

Other Tools and Equipment

In addition to the essential and advanced tools listed above, locksmiths also use a variety of other tools and equipment, including:

  • Key Extractors

Key extractors are used to remove broken keys from locks. They are designed to grip the key and pull it out of the lock without causing any damage.

  • Plug Spinners

Plug spinners are used to rotate a lock’s plug. They are used when a lock’s pins have been set in the wrong position and need to be reset.

  • Bump Keys

Bump keys are used to open pin tumbler locks. They work by tapping the key with a hammer or other object while turning it in the lock. This causes the pins to jump to the shear line, allowing the lock to be opened.

  • Lock Pick Guns

Lock-pick guns are similar to electronic lock-pick guns but are operated manually. They use a spring-loaded mechanism to vibrate the lock’s pins, which allows them to be set quickly.

Training and Certification

In order to become a professional locksmith, it is essential to have proper training and certification. Locksmiths must be knowledgeable about the various types of locks and how to open them, as well as the different tools and techniques used in the profession.

  • Importance of Proper Training and Certification:- Proper training and certification ensure that locksmiths have the necessary knowledge and skills to carry out their work safely and effectively. Without proper training, locksmiths may cause damage to locks or other property or may be unable to complete a job successfully.
  • Obtaining Training and Certification:- Locksmiths can obtain training and certification from a variety of sources, including trade schools, apprenticeships, and professional associations. It is important to choose a reputable program or organization to ensure that the training and certification are recognized within the industry.

Conclusion

In conclusion, Matrix locksmith use a wide range of tools and equipment to carry out their work. From essential tools such as key cutting machines and pick sets to advanced tools such as lock scopes and drill rigs, each tool has a specific purpose and is essential for the locksmith to carry out their work effectively. Proper training and certification are also important to ensure that locksmiths have the necessary knowledge and skills to carry out their work safely and effectively.

]]>