Even though today’s cars have automatic transmissions, they still have an ignition key. The ignition switch adjacent to the steering column spins when you enter the key, and the engine begins. What if it doesn’t? Then your annoyance starts. You must choose between having your car towed to an auto repair shop and looking for an automotive locksmith. Do neither of these things; instead, contact a mobile locksmith Toronto. Within minutes of receiving your call, they will arrive at your location and repair the malfunctioning ignition switch. In the case that such an issue arises, it is usually beneficial to understand the root reason.
Problems with ignition and related causes
These are the most common ignition problems encountered in ordinary life.
The vehicle will not start
There could be a variety of reasons for this, including
a discharged battery
When a car won’t start, the first thing that comes to mind is that the battery is dead. How can you tell if your battery life is adequate? The most straightforward method is to turn on the headlights. You do not have a faulty battery if they switch on. Check the starter now that you know your battery is still functional.
Starter
Look under the hood of your car for the starter. If you start the car and hear a clicking sound, your battery is fine, but you have a problem with the starter.
It could be caused by a faulty starter motor or faulty wiring, for example. If there is no clicking sounds but the car still won’t start, the problem could be a faulty ignition switch.
Ignition switch failure
Both your battery and starter are okay if your car’s lights turn on and there is no clicking sound when you start it. The issue is then caused by a malfunctioning ignition switch.
Inside the lock, a broken key
The key may break and become jammed within the lock due to normal wear and tear. Only an experienced vehicle locksmith can now help you extract the key.
Wafers with flaws
Wafers are the cuts required by the ignition switch to recognise the correct ignition key. If these wafers get damaged as a result of daily use, the entire ignition cylinder must be replaced.
Transponder key failure
At the end of your keyless ignition fob is an electrical transponder chip. Your key will not turn the ignition switch if this chip is destroyed.
Ignition lock failure
Even when you switch off the automobile, your key may not come out. This indicates that your ignition lock is stuck.
How to tell if your ignition switch is broken
This indicates that your ignition switch has been damaged as a result of normal wear and tear. To replace your entire ignition switch, contact a professional auto locksmithing business.
Even after repeated efforts, the automobile will not start.
Wafers are the cuts required by the ignition switch to recognise the correct ignition key. If these wafers get damaged as a result of daily use, the entire ignition cylinder must be replaced.
The key in the ignition will not turn.
Whether your key won’t turn, jiggle the steering wheel to see if the steering lock is engaged. The ignition switch is to blame if the steering wheel is not locked but the key would not turn.
While driving, the car comes to a complete stop.
It could be harmful if this occurs while driving on the highway or expressway. To replace the complete ignition cylinder, pull the vehicle to one side and call an emergency car locksmith right away…
Dashboard lights that flicker
A malfunctioning switch could be the cause of your dash lights flickering.
When you have such problems, the best way is to call a Matrix Locksmith Toronto with mobile services. These mechanics are familiar with today’s vehicle models and their ignition problems. They can perform a low-cost battery replacement or even replace the entire ignition wire system.
